Cookie preferences
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.
Lapping tools SPEED LAP
From €0.91 *
Content:
25 piece(s)
* Prices plus VAT plus shipping costs
- Order number: 0570024
- GTIN 4065735029104
- eClass 8.1: 21-01-13-90
The SPEED LAP lapping tools work quickly and reliably during stock removal and offer many... more
Product information "Lapping tools SPEED LAP"
The SPEED LAP lapping tools work quickly and reliably during stock removal and offer many advantages:
- every other grit can be omitted
- even, gentle work
- prevents scratches
- the properties of the metallic component prevent the formation of orange peel through combined lapping and polishing work
- good stock removal rates with low surface roughness
- the dimensional stability of the lapping tools encourages maintenance of the given geometry
SPEED LAP means a reduction in working stages, time saving and enhancement of surface quality
Preparation of the lapping tools:
- dress before use with fine diamond grits on a ground surface
Grit sizes:
- lapping can be performed down to 1 µ
- every other grit size can be omitted (e.g. instead of 6 µ-3 µ-1 µ now 6 µ-1 µ)
- after the preparatory work with joke Magic Stone grit size 600, lapping with 6 µ can be performed on readily polishable steels, otherwise with 9 µ.
- the diamond compound should be sufficiently diluted with fluid.
- work with light pressure for about 2/3 of the working stage and without pressure for the last third (finishing).
- use full speed in linear motion with a rather short stroke and max. 3000 rpm for rotary processing
- every other grit can be omitted
- even, gentle work
- prevents scratches
- the properties of the metallic component prevent the formation of orange peel through combined lapping and polishing work
- good stock removal rates with low surface roughness
- the dimensional stability of the lapping tools encourages maintenance of the given geometry
SPEED LAP means a reduction in working stages, time saving and enhancement of surface quality
Preparation of the lapping tools:
- dress before use with fine diamond grits on a ground surface
Grit sizes:
- lapping can be performed down to 1 µ
- every other grit size can be omitted (e.g. instead of 6 µ-3 µ-1 µ now 6 µ-1 µ)
- after the preparatory work with joke Magic Stone grit size 600, lapping with 6 µ can be performed on readily polishable steels, otherwise with 9 µ.
- the diamond compound should be sufficiently diluted with fluid.
- work with light pressure for about 2/3 of the working stage and without pressure for the last third (finishing).
- use full speed in linear motion with a rather short stroke and max. 3000 rpm for rotary processing
Suitable ball-ended rod: | 0 570 035 |
Shape: | square |
Dimensions: | 4 x 4 x 2,5 mm |