Smarty: Array ( ) 1
php: Array ( ) 1
php: Array ( ) 1
antUserStatusInfo: Array ( [UserStatusFromSession] => Array ( [success] => 1 [antUserId] => 0 [antUserGroup] => [antState] => [antArea] => [antCountry] => ) [UserStatusChecked] => Array ( [antUserStatusSuccessful] => 0 [antUserStatusDoNothingMore] => 0 [antUserLoggedIn] => 0 [antUserLoginStep] => 0 [antKeineSession] => 0 [antKeineCookies] => 0 ) ) 1
ATSD Cookie: false--- Status beforeSet: false--- Status AfterSet: false--- Status OhneSet: false--- Status SessionID: gkopv5bh4cj4fklcf72c63uvpf-- Cookie2: --- Status SessionID3: gkopv5bh4cj4fklcf72c63uvpf--
Do you have questions in our shop?
Please give us a call +49 2204 839 516 or message us!
Offer exclusively for tradesmen & companies

Milling tools

If until now, you have thought that a milling tool was just a piece of carbide metal available in various shank and head sizes, you should pay particular attention to the following pages. It pays to take a close look at the teeth of the milling bur. Ultimately, its type of toothing determines which materials it can best be used on


Tooth types of joke milling burs

Normal toothing
(also simple toothing)

Even cut with high stock removal

Criss-cross toothing 

Very good  chipping with small chips

Diamond toothing

For fibre-glass reinforced plastics, epoxy resins, phenols

Fine toothing

For delicate surfaces on hard materials

Coarse toothing

Wide chip flutes for aluminium, non-ferrous metals and plastics

Special G-toothing

For difficult to machine materials, such as nickel, titanium, stainless steels

 

 
If until now, you have thought that a milling tool was just a piece of carbide metal available in various shank and head sizes, you should pay particular attention to the following pages. It pays... read more »
Close window
Milling tools

If until now, you have thought that a milling tool was just a piece of carbide metal available in various shank and head sizes, you should pay particular attention to the following pages. It pays to take a close look at the teeth of the milling bur. Ultimately, its type of toothing determines which materials it can best be used on


Tooth types of joke milling burs

Normal toothing
(also simple toothing)

Even cut with high stock removal

Criss-cross toothing 

Very good  chipping with small chips

Diamond toothing

For fibre-glass reinforced plastics, epoxy resins, phenols

Fine toothing

For delicate surfaces on hard materials

Coarse toothing

Wide chip flutes for aluminium, non-ferrous metals and plastics

Special G-toothing

For difficult to machine materials, such as nickel, titanium, stainless steels

 

 
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
7 From 8
No results were found for the filter!
Carbide milling cutters
Order number: 0517633
From €5.22 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

Carbide milling cutters
Order number: 0517634
From €5.22 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €5.72 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €5.95 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €5.95 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €8.87 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €5.07 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

Carbide milling finisher, cylinder, shank Ø 1.6 mm
Order number: 0502294
Carbide milling finisher, cone, side cutting, Ø 1.4 x 9 mm, shank-Ø 1.6 mm, total length 19 mm
€10.80 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Delivery time 15 working days

€13.90 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Delivery time 10 working days

From €11.97 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €14.65 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €5.95 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €13.38 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

Engraver’s milling cutters in HSS, wheel, shank Ø 3 mm
Engraver’s milling cutter in HSS, s.-Ø 3 x 39mm, wheel, radius 1.1, head-Ø 8 x 2mm
From €14.77 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

€16.83 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Delivery time 10 working days

Engraver’s milling cutters in HSS, pointed cone 35°, shank Ø 3 mm
Engraver’s milling cutter in HSS, s.-Ø 3 x 40mm, pointed cone 35°, head-Ø 1.6 x 2.8mm
From €9.52 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

From €13.62 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Ready to ship today

€6.69 *
Content 1 piece(s)

* Prices plus VAT plus shipping costs

Delivery time 10 working days

7 From 8