ENESKApostpro incl. extraction with wet separator for reactive materials

Content: 1 piece(s)
Price on request
  • 0210010
  •  
  • 4065735102784
  • 21-10-13-90
  • 21-10-13-90
  • 21-10-90-90
The standard of safety during manual postprocessing is inadequate in many companies. Protective... more
Product information "ENESKApostpro incl. extraction with wet separator for reactive materials"
The standard of safety during manual postprocessing is inadequate in many companies. Protective suits are often only worn during individual working stages and are of no help against the risk of deflagration. Moreover, the working areas are not protected from invisible airborne dusts, which are usually underestimated. This is precisely where ENESKApostpro from joke can help you.

Particular caution is required when processing reactive materials. In this case, it is not only the dusts that can ignite through friction; the material is also highly flammable and therefore carries higher risks of explosion and deflagration. A special moisture extractor with 5-fold filtration and explosion protection according to ATEX standard guarantees safe work. An integrated liquid bath binds the reactive particles which are thus unable to develop their explosive effect.

Titanium or aluminium are the common materials that most users recognised as reactive, but many alloys also have references to minimum ignition energy of less than one mJ in their data sheets.

Are you not sure? We will be pleased to advise you.


• suitable for materials with a minimum ignition energy above one mJ
• with explosion protection according to ATEX standard

• moisture separator suitable for zone 22
• 5-fold filtration
• extraction capacity / volumetric flow: max. 350 m3/h
• materials to be processed: incl. among others aluminium and titanium

• incl. FSX automatic fine dust measuring system (for further information, see Order no. 0 210 306)
• optionally with height adjustment (Order no. 0 210 012)
s
Weight [kg]: 600 kg
Working chamber dimensions (W x D x H): 930 x 790 x 250-600 mm
Device dimensions (W x H x D): 1300 x 1500 x 1790 mm
Lighting: approx. 5,000K / approx. 3,300 lm, dimmable
Supply voltage: 400 V / 16 A
: Enescar; Enesca; Eneskar; entpulvern; Stützstrukturen; Postprocessing; Restentpulverung; Bauteiltrennung; Oberflächenglättung; Entgraten; Schleifen; Strahlen; Polieren; Reinigen; Additive Manufacturing