Smarty: Array ( ) 1
php: Array ( ) 1
php: Array ( ) 1
antUserStatusInfo: Array ( [UserStatusFromSession] => Array ( [success] => 1 [antUserLoggedIn] => [antUserMail] => [antUserId] => 0 [antUserGroup] => [antState] => [antArea] => [antCountry] => [antAutoCountrie] => [antAutoUser] => ) [UserStatusChecked] => Array ( [antUserStatusSuccessful] => 0 [antUserStatusDoNothingMore] => 0 [antUserLoggedIn] => 0 [antUserLoginStep] => 0 [antKeineSession] => 0 [antKeineCookies] => 0 ) ) 1
ATSD Cookie: false--- Status beforeSet: false--- Status AfterSet: false--- Status OhneSet: false--- Status SessionID: b5gil11sgghbj5pejjla1vof9i-- Cookie2: --- Status SessionID3: b5gil11sgghbj5pejjla1vof9i--
Do you have questions in our shop?
Please give us a call +49 2204 839 516 or message us!
Offer exclusively for tradesmen & companies

ENESKApostprocess 5.0 incl. extraction with wet separator for reactive materials

Content: 1 piece(s)
Price on request
  • 0210014
  •  
  • 4065735102784
  • 21-10-13-90
  • 21-10-13-90
  • 21-10-90-90
  • 36-23-90-01
The standard of safety during manual postprocessing is inadequate in many companies. Protective... more
Product information "ENESKApostprocess 5.0 incl. extraction with wet separator for reactive materials"
The standard of safety during manual postprocessing is inadequate in many companies. Protective suits are often only worn during individual working stages and are of no help against the risk of deflagration. Moreover, the working areas are not protected from invisible airborne dusts, which are usually underestimated. This is precisely where ENESKApostprocess from joke can help you.

Particular caution is required when processing reactive materials. In this case, it is not only the dusts that can ignite through friction; the material is also highly flammable and therefore carries higher risks of explosion and deflagration. A special moisture extractor with 4-fold filtration and explosion protection according to ATEX standard guarantees safe work. An integrated liquid bath binds the reactive particles which are thus unable to develop their explosive effect.

Titanium or aluminium are the common materials that most users recognised as reactive, but many alloys also have references to minimum ignition energy in their data sheets.

Are you not sure? We will be pleased to advise you.


• Suitable for materials with a minimum ignition energy above one mJ
• With explosion protection according to ATEX standard

• Moisture separator suitable for zone 22
• 4-fold filtration
• Extraction capacity / volumetric flow: max. 350 m3/h

• Incl. FSX automatic fine dust measuring system (for further information, see order no. 0 210 309)

• Materials to be processed: incl. among others aluminium and titanium


Technical data:

Weight (without/with extraction system): 650/748 kg
Dimensions of the working chamber (W x D x H): 974 x 766 x 386/869 mm
Device dimensions (W x D x H): 1,437 x 1,685 x 1,640/1,940 mm
Lighting: Fully integrated LED light, toughened safety glass, approx. 5,600K / 9,000 lm, 58 W, dimmable
Supply voltage: 400 V / 16 A
Weight [kg]: 1 kg
Supply voltage: 400 V / 16 A
Lighting: ca. 5.000K / ca. 3.300 lm, dimmbar
Working chamber dimensions (W x D x H): x * y * z mm
Device dimensions (W x H x D): x * y * z mm